vMix 触发器与快捷键中文对照表

Refresh all activator device lights and controls

模拟键盘按下并松开一个键（发给 vMix），可用来在快捷键里嵌套触发系统或其他软件的按键。

Value = 按键名，如 A、F1、Control+S

Value = Key

把按键发送给当前 Windows 活动窗口（不限于 vMix），可联动外部软件。

Value = 按键序列

Send keys to active window Value = Keys

恢复刚刚被关闭（删除）的输入。

Undo closing Input.

切换指定输入音频的静音状态，等同点击混音器里的喇叭 / M 按钮。

Toggle Audio Mute On/Off

把输入的声音送入或送出指定总线（M 主总线、A-G 辅助总线）。

Value = M/A/B/C/D/E/F/G

M,A,B,C,D,E,F,G Value = Bus

Value = M/A/B/C/D/E/F/G

M,A,B,C,D,E,F,G Value = Bus

Value = M/A/B/C/D/E/F/G

M,A,B,C,D,E,F,G Value = Bus

Value = 预设名称

Apply preset to channel matrix Value = Preset Name

Value = 插件序号，从 1 开始

Turn off Audio Plugin, starting from 1 Value = Plugin Number

Value = 插件序号

Turn on Audio Plugin, starting from 1 Value = Plugin Number

Value = 插件序号

Toggle on/off Audio Plugin, starting from 1 Value = Plugin Number

Value = 插件序号

Show Audio Plugin Editor, starting from 1 Value = Plugin Number

Value = M/A/B/C/D/E/F/G（此处填要控制的总线）

M,A,B,C,D,E,F,G Value = Bus

M,A,B,C,D,E,F,G Value = Bus

M,A,B,C,D,E,F,G Value = Bus

M,A,B,C,D,E,F,G Value = Bus

M,A,B,C,D,E,F,G Value = Bus

M,A,B,C,D,E,F,G Value = Bus

Turn off Audio Plugin, starting from 1 Value = Plugin Number

Turn on Audio Plugin, starting from 1 Value = Plugin Number

Toggle on/off Audio Plugin, starting from 1 Value = Plugin Number

Show Audio Plugin Editor, starting from 1 Value = Plugin Number

设置声音在左右声道之间的位置。

Value = -1（全左）到 1（全右），0 居中

Value = Balance -1-1

Value = Volume 0-100

Value = 音量,毫秒，如 50,2000

Set volume gradually over x milliseconds. Value = Volume 0-100,Milliseconds

Value = Volume 0-100

Value = 音量,毫秒

Set volume gradually over x milliseconds. Value = Volume 0-100,Milliseconds

Value = Volume 0-100

Value = 音量,毫秒

Set volume gradually over x milliseconds. Value = Volume 0-100,Milliseconds

Value = Volume 0-100

Value = 音量,毫秒

Set volume gradually over x milliseconds. Value = Volume 0-100,Milliseconds

Value = Volume 0-100

Value = 音量,毫秒

Set volume gradually over x milliseconds. Value = Volume 0-100,Milliseconds

Value = Volume 0-100

Value = 音量,毫秒

Set volume gradually over x milliseconds. Value = Volume 0-100,Milliseconds

Value = Volume 0-100

Value = 音量,毫秒

Set volume gradually over x milliseconds. Value = Volume 0-100,Milliseconds

对输入做前置增益补偿，不是推子音量；声音本身偏小时用。

Value = 0-24

Value = Gain dB 0-24

Value = Volume 0-100

控制主总线推子位置，即最终播出音量。

Value = Volume 0-100

Value = 音量,毫秒

Set volume gradually over x milliseconds. Value = Volume 0-100,Milliseconds

直接把某路输入推子设为指定值。

Value = 0-100

Value = Volume 0-100

Value = 总线字母,音量（如 A,60）

Set Volume of an Input's Bus Mixer (M,A,B,C,D,E,F,G) Value = Bus,Volume 0-100

Set Volume of an Input's A Bus Value = Volume 0-100

Set Volume of an Input's B Bus Value = Volume 0-100

Set Volume of an Input's C Bus Value = Volume 0-100

Set Volume of an Input's D Bus Value = Volume 0-100

Set Volume of an Input's E Bus Value = Volume 0-100

Set Volume of an Input's F Bus Value = Volume 0-100

Set Volume of an Input's G Bus Value = Volume 0-100

Set Volume of an Input's Master Bus Value = Volume 0-100

Value = 声道号,音量

Set Volume of an Input's sub channel (1 to 16) Value = Channel,Volume 0-100

在指定毫秒内把输入音量平滑过渡到目标值，避免硬切音量造成突兀。

Value = 音量,毫秒，如 20,3000

Set volume gradually over x milliseconds. Value = Volume 0-100,Milliseconds

开启后耳机里只听该输入（不影响播出），用于现场排查某一路声音。

Turn off Solo for all Inputs and Busses

Toggle between AFL or PFL mode for Solo

Turn off PFL mode for Solo

Turn on PFL mode for Solo

把指定输入瞬间切到主输出，但预监窗口内容不变。适合紧急插画面后预监仍保留待切画面。

Cuts the input directly to Output without changing Preview

主输出在黑场与正常画面之间切换，是直播安全底线按钮：开场前、中场休息、紧急情况一键黑屏。

Toggle FTB On/Off

把所选输入送到输出并立即开始播放（视频 / 列表类输入），常用于片头一键开播。

直接设置 T-Bar 推杆数值，255 等于把预监完整切到输出。

Value = 0-255

Set Master Fader T-Bar, 255 will cut to Preview Value = Fader 0-255

开关 vMix 的全屏输出（通常接到投影 / 大屏的第二显示器）。

Toggles Fullscreen On or Off

Value = Output/Preview/MultiView/Replay/Mix/Input

Change what is displayed on the External2 output. Output,Preview,MultiView,Replay,Mix,Input Value = Output, Preview, MultiView, Replay, Mix, Input

Value = Output/Preview/MultiView/Replay/Mix/Input

Change what is displayed on the Fullscreen output. Output,Preview,MultiView,Replay,Mix,Input Value = Output, Preview, MultiView, Replay, Mix, Input

Value = Output/Preview/MultiView/Replay/Mix/Input

Change what is displayed on the Fullscreen2 output. Output,Preview,MultiView,Replay,Mix,Input Value = Output, Preview, MultiView, Replay, Mix, Input

保存主输出当前画面为图片；Value 可指定文件名（支持日期模板），不填则弹出保存窗口。

Value = 文件名，如 shot {0:yyyy-MM-dd}.jpg

Create a snapshot image of the current Output. Optional Value specifies save Filename, otherwise a save file window will appear. Filename can specify date, for example mysnapshot {0:dd MMM yyyy}.jpg Value = Value

Value = 文件名（可省略）

Create a snapshot image of the selected Input. Optional Value specifies save Filename, otherwise a save file window will appear. Filename can specify date, for example mysnapshot {0:dd MMM yyyy}.jpg Value = Value

Value = 输出序号，从 0 开始；留空只控第 1 路

Optional output number starting from 0. Leave blank to control Output 1 only. Value = Output

同一个键：未录制时开始，录制中停止。导播台上最常用的录制键，避免误开两个录制。

Value = 输出序号（从 0 开始）

Optional output number starting from 0. Leave blank to control Output 1 only. Value = Output

同一个键控制开始推流 / 停止推流；Value 指定流序号可单独控某一路，留空控制全部推流。

Value = 流序号（从 0 开始），留空控全部

Optional stream number starting from 0. Leave blank to control all streams. Value = Stream

Value = 流序号，留空启动全部

Optional stream number starting from 0. Leave blank to control all streams. Value = Stream

Value = 输出序号

Optional output number starting from 0. Leave blank to control Output 1 only. Value = Output

Value = 流序号，留空停止全部

Optional stream number starting from 0. Leave blank to control all streams. Value = Stream

Value = 流序号,推流码，如 0,xxxx-xxxx

Set Key on Custom RTMP Stream. Optional stream number starting from 0 at start followed by comma, e.g 0,mystreamkey Value = Stream

Value = 流序号,密码

Set Password on Custom RTMP Stream. Optional stream number starting from 0 at start followed by comma, e.g 0,password Value = Stream

可在演出前用快捷键临时更换推流目的地（主 / 备平台切换）。

Value = 流序号,RTMP 地址

Set URL on Custom RTMP Stream. Optional stream number starting from 0 at start followed by comma, e.g 0,rtmp://myurl/ Value = Stream

Value = 流序号,用户名

Set Username on Custom RTMP Stream. Optional stream number starting from 0 at start followed by comma, e.g 0,username Value = Stream

Value = 备注文字

Write current recording duration to log file with optional tag text Value. Value = Tag Text

Value = 秒数（可为负数）

Seconds to add or subtract from current Countdown time Value = Seconds

Value = hh:mm:ss

Change countdown time according to Value as hh:mm:ss (00:00:00) Value = Time 00:00:00

Pause or Resume Countdown or if complete, Start from beginning.

批量修改字幕多个字段前先冻结，避免画面逐字段跳动，改完用 ResumeRender 恢复。

Freeze Title Input while making multiple updates

Resume Title Input rendering after making multiple updates

Value = 预设序号

Value = Preset Index

Value = #AARRGGBB 颜色；用 SelectedName 指定对象

Change Color in Title using HTML #xxxxxxxx format. SelectedIndex or SelectedName can be used to select object. Value = Color

Value = hh:mm:ss

Set countdown duration according to Value as hh:mm:ss (00:00:00) Value = Duration 00:00:00

按文件名更换字幕模板里的图片（如选手头像、二维码），留空则清除。

Value = 图片完整路径

Change Image in Title according to Filename or empty to clear. SelectedIndex or SelectedName can be used to select image. Value = Filename

Toggle Image Visibility in Title SelectedIndex or SelectedName can be used to select image.

Hide Image in Title SelectedIndex or SelectedName can be used to select image.

Show Image in Title SelectedIndex or SelectedName can be used to select image.

修改 GT / XAML 字幕输入中某个文本字段的内容，是比分条、人名条、台本字幕自动化的核心命令。用 SelectedName 指定字段名（如 Headline.Text）。

Value = 要显示的文字；SelectedName = 字段名

Change Text in Title according to Value parameter. SelectedIndex or SelectedName can be used to select Text Field Value = Text

Value = #RRGGBB 颜色

Change Colour of Text in Title in HTML format (#xxxxxx) Value = Colour

Toggle Text Visibility in Title SelectedIndex or SelectedName can be used to select text field.

Hide Text in Title SelectedIndex or SelectedName can be used to select text field.

Show Text in Title SelectedIndex or SelectedName can be used to select text field.

Value = 速度数值

Change Ticker Speed. SelectedIndex or SelectedName can be used to select ticker field. Value = Speed 0-1000

Stop and Reset Countdown

Pause Countdown Only

Value = 动画名

Value = Animation

等同硬切（Cut）到指定输入：视频直接切到主输出。Mix 参数可指定混音母线（1-4）。

Send to Output the selected Input

按 Value 描述创建一个新输入，支持 Video/Image/Audio/Photos/Stream/Title 等类型，多个参数用竖线分隔。

Value 示例：Video|D:\clip.mp4 ；Image|D:\logo.png

Create a new Input based on information provided in Value. Video|c:\\path\\to\\video.avi Image|c:\\path\\to\\image.jpg Photos|c:\\path\\to\\folder Title|c:\\path\\to\\title.gtzip VideoList|c:\\path\\to\\playlist.m3u Colour|HTMLColor AudioFile|c:\\path\\to\\audio.wav Flash|c:\\path\\to\\flash.swf PowerPoint|c:\\path\\to\\powerpoint.pptx Value = Type|Filename

Toggle automatically playing first item in a List with Transition

Turn Off automatically playing first item in a List with Transition

Turn On automatically playing first item in a List with Transition

Toggle automatically playing next item in a List

Turn Off automatically playing next item in a List

Turn On automatically playing next item in a List

Basic Auto Colour Correction.

Reset Colour Correction to Default Values.

基于指定输入创建一个虚拟输入（可独立做图层 / 调色 / PTZ 裁切而不影响原输入）。

Create a new Virtual Input from the specified Input.

vMix 29 新增：触发输入下方可自定义的 GO 按钮（默认等同 QuickPlay，也可配置为任意快捷操作）。

Trigger GO action on Input

Hides large preview of input

Shows large preview of input

Toggles large preview of input

Value = 图层序号（从 1 开始）

Turn Off Layer For Input At Index (starting from 1) Value = Index

Value = 图层序号

Turn On Layer For Input At Index (starting from 1) Value = Index

Value = 图层序号

Toggle On/Off Layer For Input At Index (starting from 1) Value = Index

Value = 文件完整路径

Add Filename to List Value = Filename

Value = 保存文件名

Export List as M3U to Filename Value = Filename

Value = 序号（从 1 开始）

Remove from List by Index starting from 1 Value = Index

Remove all items from List

Shuffle (randomize) List

Toggle Loop on Input

标记视频从此位置开始播放（配合出点可只播放片段）。

Value = 目标位置编号

Value = Number

把某输入的一个图层移动到另一图层位置。

Value = 源图层,目标图层，如 1,2

Move Layer in Input according to Value parameter. Example: 1,2 moves Layer1 to Layer2 Value = FromIndex,ToIndex

Move to next item in List

Move to Next Picture for Photo and PowerPoint Inputs

让所选视频 / 音频 / 列表开始播放。

把指定输入放到预监窗口，等待下一步转场。Mix 参数可指定母线。

Send to Preview the selected Input

Send to Preview the next Input

Send to Preview the previous Input

Move to previous item in List

Move to Previous Picture for Photo and PowerPoint Inputs

把输入恢复到默认状态（停止播放、回到起点、复位调整）。

Restart selected Input

Duration = 毫秒

Save video clip from Video Delay according to Duration in milliseconds

Value = All/Red/Green/Orange/Purple/Aqua/Blue 或 Search

Change to Category according to Value (All,Red,Green,Orange,Purple,Aqua,Blue,Custom1-16,Search) Value = Category

对照片、列表输入：选择第 N 项；对虚拟布景：缩放到第 N 个预置机位。

Value = 序号（从 1 开始）

Photos,List: Selects item in List according to Value starting from number 1 Virtual Set: Zooms to selected preset using the current speed settings Title: Starts Page animation according to Value starting from number 1 Value = Index

整体调整输入不透明度，0 全透明、255 不透明。

Value = 0-255

Set Input transparency according to Value. 0 is transparent, 255 is opaque Value = Alpha 0-255

Value = 0-2，1 为原始

Change Gain B level of Input. 1=Original Value = Value 0-2

Value = 0-2，1 为原始

Change Gain G level of Input. 1=Original Value = Value 0-2

Value = 0-2，1 为原始

Change Gain R level of Input. 1=Original Value = Value 0-2

Value = 0-2，1 为原始

Change Gain RGB level of Input. 1=Original Value = Value 0-2

Value = 0-2，1 为原始

Change Gain Y level of Input. 1=Original Value = Value 0-2

Change Gamma B level of Input. 0=Original Value = Value -1-1

Change Gamma G level of Input. 0=Original Value = Value -1-1

Change Gamma R level of Input. 0=Original Value = Value -1-1

Change Gamma RGB level of Input. 0=Original Value = Value -1-1

Change Gamma Y level of Input. 0=Original Value = Value -1-1

Change Hue level of Input. 0=Original Value = Value -1-1

Change Lift B level of Input. 0=Original Value = Value -1-1

Change Lift G level of Input. 0=Original Value = Value -1-1

Change Lift R level of Input. 0=Original Value = Value -1-1

Change Lift RGB level of Input. 0=Original Value = Value -1-1

Change Lift Y level of Input. 0=Original Value = Value -1-1

Value = -1（黑白）到 1，0 为原始

Change Saturation level of Input. 0=Original, -1=Greyscale Value = Value -1-1

Value = X1,Y1,X2,Y2（0-1）

Change current Crop value of Input. X1,Y1,X2,Y2 (values between 0 and 1) Value = X1,Y1,X2,Y2

把输入画面延迟指定帧数（音频同步延迟），用于对齐慢设备。

Value = 帧数

Set the delay in frames Value = Frames

Value = 新名称

Set the Display Name of the Input Value = Name

Value = 图层,输入编号，如 1,2

Change Layer in Input according to Value parameter. Example: 1,2 changes Layer1 to Input2 Value = Index,Input

Value = 图层,输入,毫秒，如 1,2,1000

Change Layer Index to Input. Animate if input exists in another layer. Example: 1,2,1000 changes Layer1 to Input2. Value = Index,Input,DurationMilliseconds

Change current Crop value of Input Layer from DynamicValue1 (1-10). X1,Y1,X2,Y2 (values between 0 and 1) Value = X1,Y1,X2,Y2

Change current Height value of Input Layer from DynamicValue1 (1-10). In pixels based on preset resolution Value = Pixels -4096-4096

Change current PanX value of Input Layer from DynamicValue1 (1-10). 0=centered, -2=100% to left, 2=100% to right Value = Pan -2-2

Change current PanY value of Input Layer from DynamicValue1 (1-10). 0=centered, -2=100% to bottom, 2=100% to top Value = Pan -2-2

Change current Rectangle values of Input Layer from DynamicValue1 (1-10) in pixels. X,Y,Width,Height Value = X,Y,Width,Height

Change current Width value of Input Layer from DynamicValue1 (1-10). In pixels based on preset resolution Value = Pixels -4096-4096

Change current X value of Input Layer from DynamicValue1 (1-10). In pixels based on preset resolution Value = Pixels -4096-4096

Change current Y value of Input Layer from DynamicValue1 (1-10). In pixels based on preset resolution Value = Pixels -4096-4096

Change current Zoom level of Input Layer from DynamicValue1 (1-10). 1=100%, 0.5=50%, 2=200% Value = Zoom 0-5

Value = -2 到 2，0 居中

Change current PanX value of Input. 0=centered, -2=100% to left, 2=100% to right Value = Pan -2-2

Value = -2 到 2，0 居中

Change current PanY value of Input. 0=centered, -2=100% to bottom, 2=100% to top Value = Pan -2-2

Value = Fade/Zoom 等

Set transition effect for Photos and PowerPoint Inputs (Fade, Zoom, etc) Value = Transition

Value = 毫秒

Set duration of transition effect in Milliseconds Value = Duration MS

Value = 秒

Set transition time between Photos and PowerPoint slides in Seconds Value = Seconds

跳转到视频指定时间点。

Value = 毫秒

Set Position of selected Input according to Value in Milliseconds Value = Milliseconds

Value = 0.1-4，如 0.5 半速、2 两倍速

Set Playback speed/rate for Videos and Video Delays 0.5=50%,1=100%,2=200% etc Value = Speed 0.1-4

Value = 0-1，如 0.5 半速

Set Slow Motion speed for Instant Replay 0.5=50%,1=100% etc Value = Speed 0-1

Value = 0-5，1=原大、0.5=一半、2=两倍

Change current Zoom level of Input. 1=100%, 0.5=50%, 2=200% Value = Zoom 0-5

Value = 图层A,图层B,毫秒，如 1,2,1000

Animate swapping the Layers in Input according to Value parameter. Example: 1,2,1000 swaps Layer1 and Layer2 over 1000 milliseconds. Value = FromIndex,ToIndex,DurationMilliseconds

Value = Master/Headphones/BusA-G

Master,Headphones,BusA,BusB,BusC,BusD,BusE,BusF,BusG Value = Source

Value = 嘉宾名,密码

Value = Name,Password

Value = Output1-4

Output1,Output2,Output3,Output4 Value = Source

Start Video Delay Recording

Toggle Video Delay Recording

Stop Video Delay Recording

在触发器任务列表中暂停后续动作，直到该视频播放完毕（可设超时）。注意触发器总延迟上限 30 秒，长流程请用播放列表 / 脚本。

Duration = 超时毫秒

Wait for a Video Input to reach the end of playback.

Value = 会议号,密码

Value = MeetingID,Password

Value = 参会者姓名

Value = Name

Value = 源通道,目标通道，如 1,2

Move Overlay in Input MultiView according to Value parameter. Example: 1,2 moves Overlay1 to Overlay2 Value = FromIndex,ToIndex

Value = 序号（从 1 开始）

Toggle On/Off MultiView Overlay For Input At Index (starting from 1) Value = Index

Value = 序号

Turn Off MultiView Overlay For Input At Index (starting from 1) Value = Index

Value = 序号

Turn On MultiView Overlay For Input At Index (starting from 1) Value = Index

一次性撤下 1-8 路所有叠加内容（硬切）。

Immediately switch all Overlays Off

Value = 通道,输入，如 1,2

Change Layer in Input MultiView according to Value parameter. Example: 1,2 changes Layer 1 to Input2 Value = Index,Input

Move to Next Item in a running PlayList

Move to Previous Item in a running PlayList

Value = 播放列表名称

Open PlayList with Name matching Value Value = PlayList

启动按顺序编排好的一整套节目（宣传片→正片→片尾等长流程自动化首选）。

启动在 Scripting 面板中写好的 VB.NET 脚本，实现触发器做不到的复杂逻辑。

Value = 脚本名称

Value = Script Name

Value = 直接写 VB.NET 代码

Start a dynamic script using code specified as the Value. Value = Code

Value = 脚本名称

Value = Script Name

Value = Text

Value = 机位号,文字

Adds the text to the specified angle (1-4), example: 3,angle3text Value = Camera,Text

Value = Text

Value = 机位号,文字

Adds the text to the specified angle (1-4), example: 3,angle3text Value = Camera,Text

Value = 速度；Channel = A/B

Value = Speed

Value = 列表号 0-19

Value = Event List 0-19

Value = 列表号 0-19

Value = Event List 0-19

Value = 文件夹；Channel = A/B

Value = Folder

Value = 倍速 1-30

1-30x Value = Speed

Value = 倍速 1-30

1-30x Value = Speed

在回放时间线上跳转，Value 为帧数（配合 FastOn 时为秒数），负数后退。

Value = 帧数（负=后退）

Value = Frames

ReplayJumpFrames jumps 1 frame for each value instead of 1 second.

ReplayJumpFrames jumps 1 second for each value instead of 1 frame.

Set Position to In point of Selected Event.

Set Position to Out point of Selected Event.

Value = 机位 1-8

Turns off the specified camera angle (1-8) Value = Camera

Value = 机位 1-8

Turns on the specified camera angle (1-8) Value = Camera

Value = 机位 1-8

Turns on only the specified camera angle (1-8) Value = Camera

从回放浏览状态切回实时输入画面。

按指定的回看秒数自动生成一个回放事件片段，是回放员按得最多的键。

Value = 向前取多少秒

Number of previous seconds to use when creating a new event. Value = Seconds

Number of previous seconds to use when creating a new event. Value = Seconds

Number of seconds into the future to use when creating a new event. Value = Seconds

Number of previous seconds to use when creating a new event. Value = Seconds

Value = 列表号 0-19

Value = Event List 0-19

Value = 列表号 0-19

Value = Event List 0-19

Value = 帧数（负=前移）

Value = Frames

Value = 帧数

Value = Frames

Play all Events in active list

Play all Events in active list

Value = 片段序号（0=列表底部）

Value = Event Number where 0 is bottom of list 0-1000

Value = ID 列表

Value = List of IDs

Value = List of IDs

Value = Event Number where 0 is bottom of list 0-1000

Value = -10 到 10

Move back or forward through events list Value = Count -10-10

Select all events in active channel.

Value = 机位 1-8

Turns off the specified camera angle (1-8) Value = Camera

Value = 机位 1-8

Turns on the specified camera angle (1-8) Value = Camera

Value = 机位 1-8

Turns on only the specified camera angle (1-8) Value = Camera

Value = 下拉框名称，如 Camera1

Name as per dropdown box. e.g 'Camera1' Value = AudioSource

Set A Timecode to B Timecode

Set A Timecode and Camera to B

Set B Timecode to A Timecode

Set B Timecode and Camera to A

Value = 文字

Value = Text

Value = 机位号,文字

Changes the text of the specified angle (1-4), example: 3,angle3text Value = Camera,Text

Value = 文字

Value = Text

Value = 机位号,文字

Changes the text of the specified angle (1-4), example: 3,angle3text Value = Camera,Text

Value = 0-1，如 0.5

See SetRateSlowMotion Value = Speed 0-1

Value = yyyy-MM-ddTHH:mm:ss.fff

Set position to Timecode in format yyyy-MM-ddTHH:mm:ss.fff Value = Timecode

Swap A to B and vice versa, includes angles and playback status.

Update In point of Selected Event to current Position.

Update Mark Out point of Selected Event to current Position.

Update Selected Event to use Current Speed.

Update Selected Event to use Default Speed.

Value = 0-1

See SetRateSlowMotion Value = Speed 0-1

Value = 指令内容

Send specified command to NDI source Value = Command

Value = 0-100

Value = Index 0-100

Value = NDI 源名称

Value = Name

Value = 0-100

Value = Index 0-100

Value = OMT 源名称

Value = Name

Creates a PTZ Virtual Input with the current Position

Value = 速度 0-1

Value = Speed 0-1

Value = 速度 0-1

Value = Speed 0-1

Value = 速度 0-1

Value = Speed 0-1

Value = 速度 0-1

Value = Speed 0-1

Value = 速度 0-1

Value = Speed 0-1

Value = 速度 0-1

Value = Speed 0-1

Value = 速度 0-1

Value = Speed 0-1

Stop all PTZ movement

让云台运动到某个虚拟输入记录的预置机位，但不把该虚拟输入切到预监。

Moves to the Position of the PTZ Virtual Input without selecting it into Preview

Value = 序号

Moves to the Position of the PTZ Virtual Input associated with this Input. Index is first Input found starting from 0 Value = Index 0-100

Value = 速度 0-1

Value = Speed 0-1

Value = 速度 0-1

Value = Speed 0-1

Value = 速度 0-1

Value = Speed 0-1

Updates selected PTZ Virtual Input with current Position

Value = 速度 0-1

Value = Speed 0-1

Value = 速度 0-1

Value = Speed 0-1

Load the last preset.

从文件载入一个完整 vMix 工程（所有输入、布局、设置）。

Value = .vmix 预设文件完整路径

Load preset from the specified Filename. Value = Filename

把当前整场配置保存为 .vmix 文件。

Value = 文件完整路径

Save preset to the specified Filename. Value = Filename

Value = 数据源名,表名，如 Excel/CSV,Sheet1

Name of the Data Source, Table Name (optional) eg 'Excel/CSV,Sheet1' Value = Name,Table

Value = 数据源名,表名

Name of the Data Source, Table Name (optional) eg 'Excel/CSV,Sheet1' Value = Name,Table

Name of the Data Source, Table Name (optional) eg 'Excel/CSV,Sheet1' Value = Name,Table

Name of the Data Source and Table Name (optional) eg 'Excel/CSV,Sheet1' Value = Name,Table

Name of Data Source eg 'Excel/CSV' Value = Name

Name of Data Source eg 'Excel/CSV' Value = Name

Name of Data Source eg 'Excel/CSV' Value = Name

Name of the Data Source and Table Name (optional) eg 'Excel/CSV,Sheet1' Value = Name,Table

Value = 数据源,表,行号（从 0 开始）

Name of the Data Source, Table Name (optional) and Row Index starting from 0 eg 'Excel/CSV,Sheet1,5' Value = Name,Table,Index

让 vMix 浏览器输入打开指定 URL，可用于切换网页比分、网页看板。

Value = 完整网址

URL Value = URL